Accepts Glass 24" (61cm) Wide By Any Length
The MiniPasser™ is the only cabinet designed specifically for blasting decorative glass. Slots on each side permit sheets of glass 24" (61 cm) wide by any length to be "passed" through. Only the portion of the glass that is within the cabinet at any one time is blasted.
Just slide the glass through, stopping to blast a new area as it enters the cabinet. The slots (and the easel inside) are tipped back at the top seven degrees so that the glass will rest against the rear gaskets in the cabinet and create a seal against abrasive loss.
This angle also makes the work much easier to see than in a vertical position. When the gaskets are installed in the slots, the MiniPasser™ is a conventional cabinet. Blast sheets up to 24" x 29" (61 cm x 73,6 cm) and 3D objects can be up to 12" (30.5 cm) deep.
Front Opening Swing-up Glass Door: Provides easy access to the work and a very large viewing area
Slide Slots: Accommodates sheets up to 1/2" (1.27cm) thick by 24" (61cm) wide
Gaskets: 24" (61cm) molded foam strips are tucked into the slots to seal the cabinet. The narrow face of the strip is used when there is glass in the slot and the wide face when the slot is vacant.
Easel: Holds any size sheet that will fit in the cabinet. The easel is removable for 3D objects
Lighting: A 100 Watt magnetic-base adjustable lamp
Spring-loaded Hopper Door: Keeps the abrasive in the hopper until it is time to replenish the pressure pot
Gauntlet-type Gloves: Keeps arms and hands from coming in contact with the abrasive.
Access Ports (both sides): for a standard sand hose or Glastar's Flexible Hose Assembly
|Overall Height||56" (142.25cm)|
|Overall Width||26 1/2" (67.31cm)|
|Overall Depth||18" (45.72cm)|
|Box Working Height||29" (73.66cm) Inside Dimension|
|Box Working Width||24" (60.96cm)|
|Box Working Depth||12" (30.48cm)|
|Slot Dimensions||1/2" x 24" (1.27 x 60.96cm)|
|Glass Door||14" x 26" (35.56 x 66.04cm|
|Weight - upper half||58 lbs. (26.31 kg)|
|Weight - lower half||62 lbs. (28.13 kg)|
Viewing Window Liner: An inexpensive, replaceable plastic liner for the glass door to protect it from sandblast over spray
Flexible Hose Assembly: An ultra-light, flexible hose allowing you to direct the nozzle with very little effort achieving greater accuracy
|MiniPasser™ w/Glass Door||S36060||$1,050.00|
|MiniPasser™ w/Siphon System||S36061||$1,200.00|
|Filter Pair Respirator||S36501||$21.50|
|Siphon Bottle Blaster||S36045||$120.00|
|Air-Actuated Footswitch Kit||S36300||$254.00|
|Blow Down Nozzle Assembly||S36345||$36.75|
|Flexible Hose and Nozzle Assembly||S36344||$68.75|
|For use inside a cabinet only|
|Lamans Water Extractor|
|1/4" 15 CFM||S36511||$120.00|
|1/2" 50 CFM||S36514||$275.00|
|Magnetic Base Lamp||S36675||$66.95|
|For use in a blasting cabinet|
|Model "A" Siphon Gun||S36540||$90.00|
|Siphon Gun w/ Abrasive Canister (SE352)||S36090||$97.50|
|Gloves 24" Rubber||S36392-1||$23.25|
|Squeeze Lever Shut-Off||S36337||$93.25|