Glastar pressure blasters are especially set up for decorative sandblasting on glass, wood, stone or metal.
Our blasters can be used equally well at low or high pressures. We feature a lightweight 3/8" sand hose and a small nozzle assembly ideal for delicate, finely detailed work, as well as for large blasted areas. The small diameter nozzles we supply with the blasters allows the efficient use of a small compressor (2hp acceptable, 5hp recommended). Larger nozzles are also available.
Minor assembly is required and instructions are included. The model 100B-S comes with an air-activated footswitch. The air-controlled valve turns the stream of abrasive and air on and off immediately. This is a very convenient accessory.
Glastar sandblasters offer higher quality at a lower cost than any comparable blasters. The units come complete; no extra parts are necessary. This includes:
- The tank
- Water separator
- Pressure regulator
- Air gauge
- All valves
- Sandblast hose
- Spare nozzles
|Abrasive Capacity*||100 lbs.|
|Approximate Blast Time**||1-3 hours|
* Capacity listed for silicon carbide; with sand, slightly less.
**Estimate based on average abrasive settings and operator techniques.
*** Hoses supplied are all 3/8" i.d., best for most projects an any pressure. 1/2" hose and nozzle assembly available separately for use on very large projects.
|With Squeeze Lever Shut Off|
|With Squeeze Lever Shut Off||S36018||$875.00|
|Includes Water Separator and Pressure Regulator|
|Includes Water Separator, Pressure Regulator|
|and Air-Actuated Foot Switch|
|PRESSURE BLASTER PARTS|
|1/2 ” Brass Valve||S36321||$20.50|
|Nozzle Cap 3/8" (New)||S36338-3||$8.40|
|Nozzle Gaskets (Pressure Blaster)||S36338-4||$1.65|
|Hose End Adapter (for S36338-3 Cap)||S36364||$9.75|
|Hose Adapter 1/2" - 3/8"||S36362||$9.75|
|Sand Hose 3/8" X 10'||S36351||$92.50|
|4 Way Clean Out 1/2"||S36406||$9.50|
|Water Separator With Sight Glass||S36330||$65.00|
|Drain Cock 1/4"||S36334||$7.50|
|Pressure Release Valve 1/4"||S36336||$25.20|